CCTV Siamese Cable CCTV COMBO RG59/U + 2/18 CL2

Product InformationSpecifications Siamese type configuration with separation web RG-59/U Type coax plus one pair 18 AWG stranded (Coax) solid bare copper conductor 20 AWG Gas injected polyethylene coaxial core Nom. OD .142 inch (3.61 mm) with an aluminum polyester tape barrier Bare copper braid shield 95% coverage Unshielded 18 AWG twisted pair employing PVC insulation and PVC fillers Overall PVC jacket Nom. OD .232 x .460" (5.89 x 11.68 mm)Applications: Indoor cable (non-conduit per NEC) for: CCTVRating as per NEC: UL listed NEC type CM as defined in Article 800 C(UL)+ listed CMH Constructed in accordance with UL Standard 444 Listed as being resistant to the spread of fire as defined in Section 800 of the National Electric Code.Installation Characteristics: Minimum Bend Radius: 2.5" Maximum Pulling Tension: 45 lbs.Electrical Characteristics: Nominal capacitance: 16.2 pf/ft 53.1 pf/m* Vel. of Prop.: 82% Nominal Impedance: 75? 20 AWG Nom. D.C.R. @ 20?C: 10.1?/1000 fThis is an all-in-one cable solution! One cable that contains both RG-59 coaxial video wire and also a pair of red and black 18 gauge copper wires for power supply.Forget about buying a separate power supply for each camera and, even worse, make a power source to plug each one into.Now you can simply run a single Siamese cable from each camera to your surveillance system. Plug the video wires into your system, and then connect all the power wires to a Terminal Block. Then simply connect one adequate power supply to the terminal blockFor Large Quantities - Please Call for Unbelievable Price !!!